Return to search

Discrete fiber Raman amplifiers for agile all-photonic networks

This thesis is dedicated to the study of gain transients of discrete fiber Raman amplifiers and to the all-optical gain-clamping technique which is used to mitigate those transients. / First, we study the standing-wave and the traveling-wave gain-clamping techniques when applied to a single discrete fiber Raman amplifier in the context of WDM channel add and drop. We take into account the operational regime of the amplifier and the location of the surviving channel in the amplification band. We demonstrate that the gain-clamped amplifier has to be operated in a regime below the critical regime to ensure that gain-clamping will be in effect. The efficiency of gain-clamping also depends on the feedback level of the lasing signal and on the implementation. / Next, we investigate the dynamic behaviour of a single discrete fiber Raman amplifier fed by multi-channel packet traffic. Our study shows that the efficiency of the gain-clamping technique to reduce the gain transients is dependent upon the operational regime of the amplifier and the packet duration. However, we also demonstrate that gain-clamping is not required to control the gain transients as the gain variations of the unclamped amplifier are small enough to be neglected. / We then theoretically analyse the dynamic response of cascades of discrete fiber Raman amplifiers subject to WDM channel add and drop. We consider cascades of mixed unclamped and gain-clamped amplifiers, varying the number and the position of the gain-clamped amplifiers in the cascade and taking into account the location of the surviving channel and the operational regime of the amplifiers. Our results show that the location of the gain-clamped amplifiers in a mixed cascade affects the transient characteristics and that it is possible to control the transients within tolerable limits. / Finally, we investigate the gain transients that occur in hybrid amplifiers in the presence of channel add and drop. We demonstrate that the gain-clamping technique can be used to mitigate the gain transients in hybrid amplifiers and that the surviving channel location does not influence the transient characteristics, contrary to the case of single and cascaded fiber Raman amplifiers.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.103199
Date January 2007
CreatorsGest, Johann.
PublisherMcGill University
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Formatapplication/pdf
CoverageDoctor of Philosophy (Department of Electrical and Computer Engineering.)
Rights© Johann Gest, 2007
Relationalephsysno: 002668956, proquestno: AAINR38590, Theses scanned by UMI/ProQuest.

Page generated in 0.0011 seconds