Return to search

Functional coatings for steel melt filtration

In order to considerably improve the quality of steel products, efforts are being made to increase the cleanness of steel. It is known that the size, type and distribution of non-metallic inclusions (NMIs) in metals significantly influence their mechanical properties. Within the frame of the Collaborativ Research Centre 920 'Multifunc-tional filters for metal melt filtration – a contribution to zero defect materials.”, carbon-bonded alumina filters for steel melt filtration has been investigated. In the present thesis, the interactions between coated carbon-bonded alumina filters and a steel melt were investigated in more detail, with the porous coatings being based on alumina. The time-depended behaviour was evaluated by immersing coated filters for different dwell times. After the immersion tests, the microstructure of the filter surface and the NMIs remaining in the solidified steel were examined to comprehend the interactions.
The here presented results imply that carbon of the carbon-bonded alumina sub-strate took part in the filter–steel interactions. The presence of dissolved carbon at the filter–steel melt interface is essential to promote alumina dissolution and pre-cipitation processes. Thereby, the melt was locally supersaturated with aluminium, which reacted with dissolved oxygen to form secondary corundum. During these interactions, a liquid oxide film was formed directly at the ceramic surface and provided nuclei for heterogeneous nucleation of secondary corundum. After immersion during cooling, a characteristic layer built-up formed at the filters surface. All alumina-based coated filters contributed to the filtration of especially alumina-based NMIs, and outperformed the uncoated carbon-bonded alumina filter.
During the first experimental trials, it became obvious that the thermal shock resistance of the alumina coating has to be enhanced. For this purpose, a material combination was investigated which so far has not been used as a coating material to the author’s knowledge: alumina-zirconia-titania in the ration 95 : 2.5 : 2.5. This material is known for its excellent thermal shock resistance. Thereby, the influence of zirconia or titania doping of the coating were considered. The addition of titania enhanced wetting of this filter by the steel melt. As a result, alumina inclusions of the steel melt were modified: they were more in number, but distinctly smaller compared to trials without filter or the immersion of the other filter types. Especially, the decreased average area of the alumina inclusions is interesting because the particle size of NMIs strongly influences the fatigue life of a steel product. The deformability of a steel product, however, is determined by the amount of NMIs. Thus, the modification of alumina inclusions by adding titania to the filter coating might present a way to tailor these inclusions depending on the product’s application.

Identiferoai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:78495
Date29 March 2022
CreatorsSchmidt, Anne
ContributorsAneziris, Christos G., Volkova, Olena, TU Bergakademie Freiberg
Source SetsHochschulschriftenserver (HSSS) der SLUB Dresden
LanguageEnglish
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, doc-type:doctoralThesis, info:eu-repo/semantics/doctoralThesis, doc-type:Text
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0025 seconds