In Multi-Standard receivers, multiple radios co-exist in close proximity. A desired signal can be accompanied by significantly stronger out-of band interferers or blockers, which can severely degrade a receiver's sensitivity through gain compression of the blocks in the receiver chain. This work presents a new Transimpedance Amplifier (TIA) low-pass filter architecture which seeks to solve the out-of-band blocker problem of the existing architectures.
A higher order filtering is embedded within the TIA in the form of an active feedback to provide more attenuation to out-of-band blockers. The active feedback circuitry feeds back an equivalent amount of current to the input node to cancel out incoming out-of-band blockers while maintaining an acceptable voltage swing at the output of the TIA. The proposed TIA filter has a channel bandwidth of 20MHz, and can processes interferers of +/- 10mA fully differential without saturating the opamps. The maximum single ended voltage swing at all the nodes is +/- 200mV.
All the circuits were designed in IBM 180nm CMOS process with a supply voltage of 1.8V.
| Identifer | oai:union.ndltd.org:tamu.edu/oai:repository.tamu.edu:1969.1/ETD-TAMU-2012-08-11483 |
| Date | 2012 August 1900 |
| Creators | Boakye, Emmanuel |
| Contributors | Karsilayan, Aydin |
| Source Sets | Texas A and M University |
| Language | en_US |
| Detected Language | English |
| Type | thesis, text |
| Format | application/pdf |
Page generated in 0.002 seconds