<p dir="ltr">Thermo-acoustic interactions, characterized by the coupling between heat release and acoustic waves, are a phenomenon that can lead to combustion instability in high-speed propulsion devices. These interactions are highly undesirable as they can damage engine components and, in severe cases, cause catastrophic failure of the entire propulsion system. Mitigating these instabilities is crucial for ensuring reliable combustor operation. This work presents a computational investigation of combustion instability in Purdue's Continuously Variable Resonance Combustor (CVRC), focusing on the prediction of instability trend over the entire oxidizer-post length range. Computational fluid dynamics (CFD) studies in the past mainly focused on individual CVRC cases with specific oxidizer-post lengths. Those studies help understand the instability mechanism for individual CVRC cases but are limited in examining the applicability of model predictions over a wide range of instability conditions. No studies have been reported to assess the model predictivity over the entire oxidizer-post range in CVRC. </p><p dir="ltr">In this work, we first conduct a series of CFD simulations that cover the entire oxidizer-post length in CVRC to assess the models for a wide range of instability conditions. It is found that the CFD models generally fail to capture the instability trend over the entire oxidizer-post length although they can capture some individual cases. To understand the model failure, parametric studies are often deemed the first step of investigation. Such parameter studies, however, are expensive for CVRC since more than ten simulation cases to cover the entire oxidizer-post range are needed for each parametric study. Multiple parametric studies are typically needed to cover various uncertainties from numerics and physical models and those involved in the experimental conditions, making parametric studies for CVRC a computationally expensive task. Therefore, our focus next is on developing faster approaches.</p><p dir="ltr">The second part of this work is to develop a reduced-order model to quickly conduct the needed parametric studies. The developed reduced-order model leverages the instability mechanisms observed from the CFD simulations conducted in the first part. Monte Carlo approaches are employed to replace expensive CFD simulations by replicating the randomness in the combustor through statistical sampling. The developed reduced-order model is first validated by comparing its predictions with the CFD simulation results in a number of cases. The reduced-order model, despite its simplicity, reasonably reproduced the overall trend of instability from CFD simulations, making it an attractive alternative to the detailed model simulations for parametric studies. </p><p dir="ltr">The validated reduced-order model is then applied to parametric studies of CVRC to help identify the uncertainties of CFD predictions of CVRC. Four sets of parametric studies are conducted to provide a rapid examination of the effect of heat loss, the effect of oxidizer temperature, the effect of equivalence ratio, and the effect of turbulence on the instability predictions in CVRC. From the rapid reduced-order parametric studies, we found that the heat losses in upstream of the oxidizer inlet and the combustor wall are the two most contributing factors to the uncertainties of CFD model predictions. The turbulence level and the error involved in the equivalence ratio due to experimental uncertainties play an insignificant role in contributing to the CFD prediction uncertainties. </p><p dir="ltr">This work is a significant contribution to the combustion instability community by enabling an alternative rapid assessment of CFD model predictions. This capability facilitates the identification of major contributing factors of CFD modeling uncertainties with much less computational cost, thereby allowing for a more focused approach to CFD analysis and ultimately accelerating the improvement of CFD models for combustion instability studies. </p>
| Identifer | oai:union.ndltd.org:purdue.edu/oai:figshare.com:article/26072428 |
| Date | 22 June 2024 |
| Creators | Zehao Lu (18858721) |
| Source Sets | Purdue University |
| Detected Language | English |
| Type | Text, Thesis |
| Rights | CC BY 4.0 |
| Relation | https://figshare.com/articles/thesis/Reduced-Order_Monte_Carlo_Modeling_of_Thermo-Acoustic_Instability_in_a_Model_Rocket_Combustor/26072428 |
Page generated in 0.0022 seconds