The diploma thesis presents the usability of a new thermosetting material BMC for the construction of a car headlight. In the theoretical part there are described headlights, basic characteristics and properties of plastics focussing on polymer composite materials and material testing. The practical part deals with the processing of test samples for mechanical testing by compression moulding and also with the production of real samples of reflectors and carrier frames by injection moulding. The evaluation is based on comparison of the results of the performed tests of alternative material and the currently used BMC TETRADUR TD 492/2 in HELLA Autotechnik Nova s.r.o. Basic physical-mechanical properties such as strength, stiffness, toughness and hardness are tested and monitored. The reflectors and carrier frames are assembled into the headlight and then tested according to legal and customers´ requirements for climate and vibration resistance and photometry.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:401531 |
| Date | January 2019 |
| Creators | Rašner, Martin |
| Contributors | Kolář, Michal, Píška, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds