Return to search

PECVD Oxide with Low Nitrogen Content for High Performance Waveguie Devices

Silicon oxynitride (SiON) films for applications of optical waveguide devices deposited using plasma-enhanced chemical vapor deposition were investigated. The SiON films were deposited on 4¡¨ silicon wafers based on the reaction of N2O/SiH4 precursors. The refractive indices of the films were adjusted by varying the partial pressure of SiH4 in the precursors. In addition, films prepared at conventional flow (~1500 sccm) and low flow (~1000 sccm) conditions were compared.
We found that the nitrogen content of the films grown at low flow conditions can be significantly reduced resulting in a reduction of absorption around 1500 nm. Therefore SiON films grown at low flow conditions would be more suitable for optical waveguide fabrication.
Finally, with the aid of the beam propagation method (BPM) software, a single-mode optical waveguide based on the proposed technology was designed and fabricated. The propagation loss was 0.79dB/cm for TE polarization, and 0.73db/cm for T

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0630103-142235
Date30 June 2003
CreatorsTseng, Li-Feng
ContributorsAnn-Kuo Chu, Ju-Ta Tong, Weng-Chang Ho, Kong-Huang Lin
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0630103-142235
Rightsunrestricted, Copyright information available at source archive

Page generated in 0.0018 seconds