The need for assistive technology (AT) extends far outside of the countries where users have the financial capacity to buy them, or there is a social welfare infrastructure to subsidize their purchase. In developing countries, where both technology and financial resources are scarce, AT users face tremendous challenges to find high-quality devices that are affordable. This scenario is in part due to organizations who transfer sub-standard AT to these countries by taking a 'something is better than nothing approach' to a clinically and technologically challenging problem. The goal of this work is to develop and demonstrate AT design and technology transfer strategies that take into consideration the clinical and technological needs of the intended user population. Although other projects have and do take these important user-centered factors into consideration, this work represents the first comprehensive attempt from an academic perspective, where hypotheses are proposed and tested, and design goals are described and evaluated with respect to the final product. The main focus of this work is on mobility devices (wheelchairs, specifically) although many of the protocols and techniques could be extended to address AT design and technology transfer to developing countries in general. The first part of this dissertation (Chapters 1 & 2) focuses on the background literature, and proposes a model describing the important factors influencing the success or failure of a wheelchair technology transfer project. The second part of this dissertation provides a case study in the development of an electric powered wheelchair for users in India. First, an analysis of a commercially available low-cost powered wheelchairs were evaluated (Chapter 3). Second, a study to assess the needs of users in India was performed using a modified ethnographic approach (Chapter 4). Third, the design and evaluation of a novel low-cost electric powered wheelchair for Indian users is described (Chapter 5). The final chapter (Chapter 6) discusses the implication of this work and suggests future directions. The entire drawing-set for the second generation prototype developed here is also included, allowing others to build upon the approach and the design developed here.
| Identifer | oai:union.ndltd.org:PITT/oai:PITTETD:etd-07162007-131541 |
| Date | 12 September 2007 |
| Creators | Pearlman, Jonathan Lee |
| Contributors | Rory Cooper, PhD, H.S. Chhabra, MD, Katherine Seelman, PhD, Dan Ding, PhD |
| Publisher | University of Pittsburgh |
| Source Sets | University of Pittsburgh |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.library.pitt.edu/ETD/available/etd-07162007-131541/ |
| Rights | restricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Pittsburgh or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0076 seconds