The use of natural fibers as reinforcement in thermoplastics presents an interesting alternative for the production of low cost and ecologically friendly composites. One of the advantages of using natural fibres is their low specific weight, resulting in higher specific strength and stiffness when compared to glass reinforced composites. Natural fibres also present safer handling and working conditions. They are non-abrasive to mixing and can contribute to significant cost reduction. This work is divided into two phases: Phase 1 deals with developing nonwoven mats composites from flax/polypropylene (PP) and evaluating their properties. Flax/polypropylene fibres (at different weight ratios) were processed by needle-punching technique in order to form nonwoven mats. The mats were compression-molded at a temperature of 180oC to form composite materials. The mechanical, thermal and viscoelastic properties of the composites were analyzed. Composites (untreated and silane-treated) were also subjected to varying conditions of temperature and humidity and the tensile properties of the conditioned and unconditioned composites were investigated. The mechanical properties (tensile, flexural and impact) of flax/PP composites were found to increase and reach maximum values at 30 per cent fibre loading and then decrease at higher fibre content. Thermal studies revealed that the composites were stable up to 320oC and samples containing 40 per cent flax fibres were found to exhibit greater thermal stability than neat PP. The dynamic mechanical analyses of the composites showed that the incorporation of flax in the composites resulted in an increase of the storage modulus with a maximum value exhibited by composite containing 40 per cent fibre loading. Composites containing chemically modified fibres exhibited low tensile modulus after conditioning. Phase 2 is based on the investigation of the effect of nano-calcium carbonate (CaCO3) on the properties of two types of polymer matrices: recycled PP and virgin PP. In this case, composites were prepared by melt-mixing and injection molding. The mechanical and thermal properties of the composites were characterized. The tensile modulus of the nano-CaCO3 filled PP (virgin and recycled) composites were found to increase and reach maximum at 30 per cent nano-CaCO3 loading, while the tensile strength decreased with increasing filler content. Thermal studies showed that the nano-CaCO3 filled PP samples exhibited a one-step degradation pattern and are thermally stable up to 450oC. The thermal stability of the samples was found to decrease following the addition of nano-CaCO3. SEM micrographs of the tensile fractured surfaces of composites of the nano-CaCO3 filled virgin and recycled PP revealed the presence of nano-CaCO3 agglomeration.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:10456 |
Date | January 2015 |
Creators | Biyana, Nobuhle Yvonne |
Publisher | Nelson Mandela Metropolitan University, Faculty of Science |
Source Sets | South African National ETD Portal |
Language | English |
Detected Language | English |
Type | Thesis, Masters, MSc |
Format | xii, 56 leaves, pdf |
Rights | Nelson Mandela Metropolitan University |
Page generated in 0.0014 seconds