Return to search

Measurement and modelling of errors for relaying current transformers and voltage transformers

A measurement tool has been developed to estimate errors in relaying current transformers and voltage transformers. The tool has been developed to collect data in a substation and send it to a remote location over a telephone line. Different schemes were evaluated and tested in the laboratory. The final choice was made on the basis of the hardware and transmission cost constraints.

The measurement unit was developed using hardware similar to that used in a computer relay. The signals from the current and voltage transducers were sampled using a microprocessor and an analog to digital converter in real-time. The measurement device has been installed in the field. The data from the field was collected remotely and analyzed in the Virginia Tech Power Systems laboratory. The analysis of the data is presented at the end. / Master of Science

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/42139
Date18 April 2009
CreatorsVichare, Nitin Shrikrishna
ContributorsElectrical Engineering
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
LanguageEnglish
Detected LanguageEnglish
TypeThesis, Text
Formatx, 115 leaves, BTD, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationOCLC# 22391902, LD5655.V855_1990.V545.pdf

Page generated in 0.0019 seconds