Return to search

Performance limits of linear variable reluctance motors in controlled linear motion applications

Improved actuator point-to-point positioning performance, as measured by settling time, has been demonstrated in the context of manufacturing automation applications such as circuit board assembly and other product-transfer operations. The control objective is to move a single mass in a single axis from a starting position to a target position following the fastest possible motion trajectory while meeting final-position accuracy requirements. The actuator's achievable force that is available for acceleration is the fundamental variable that determines optimal settling time. The actuator technology employed is the linear variable reluctance motor.
Mathematical motor models and simulation programs have been developed to perform several tasks necessary for demonstrating improved actuator performance: (i) optimal commutation under force ripple constraints has been computed to determine ripple-specified force limits and to provide excitation waveforms necessary for force production, (ii) motion profiles for several positioning task scenarios have been generated based on computed ripple-specified force limits, (iii) state space integral position control simulations have been performed to evaluate the degree of success of the proposed relaxation of force ripple constraints in improving settling time and (iv) the computed settling times for positioning tasks have been examined in relation to the copper losses associated with them in order to assess the trade-off.
It has been shown that higher force capability is achieved when force-ripple constraints, which have been customarily emphasized in positioning applications, are relaxed. The higher capability is exploited by adopting faster motion trajectories, which are then imposed under feedback control to achieve faster settling time. Improved force capability with relaxed ripple constraints is demonstrated by generating average force versus speed capability curves under ripple constraints ranging from minimal ripple to unconstrained ripple. Improved positioning performance, with relaxed ripple constraints and without violating the final-position accuracy specification, is demonstrated by computing and comparing settling time for multiple positioning tasks with trajectories based on both extremes of force capability, lowest (no-ripple) and highest (unconstrained-ripple) force limits. The results have been demonstrated for two LVR motor configurations: one motor configuration represents typical (switched) linear and rotary variable reluctance motors while the other exhibits features of both switched and synchronous varieties of variable reluctance motors.

Identiferoai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/50310
Date13 January 2014
CreatorsAhmed, Raga
ContributorsTaylor, David G.
PublisherGeorgia Institute of Technology
Source SetsGeorgia Tech Electronic Thesis and Dissertation Archive
Languageen_US
Detected LanguageEnglish
TypeDissertation
Formatapplication/pdf

Page generated in 0.002 seconds