Return to search

Analysis and direct optimization of cutting tool utilization in CAM

The search for increased productivity and cost reduction in machining can be interpreted as the desire to increase the material removal rate, MRR, and maximize the cutting tool utilization. The CNC process is complex and involves numerous limitations and parameters, ranging from tolerances to machinability. A well-managed preparation process creates the foundations for achieving a reduction in manufacturing errors and machining time. Along the preparation process of the NC-program, two different studies have been conducted and are presented in this thesis. One study examined the CAM programming preparation process from the Lean perspective. The other study includes an evaluation of how the cutting tools are used in terms of MRR and tool utilization. The material removal rate is defined as the product of three variables, namely the cutting speed, the feed and the depth of cut, which all constitute the cutting data. Tool life is the amount of time that a cutting tool can be used and is mainly dependent on the same variables. Two different combinations of cutting data might provide the same MRR, however the tool life will be different. Thereby the difficulty is to select the cutting data to maximize both MRR and cutting tool utilization. A model for the analysis and efficient selection of cutting data for maximal MRR and maximal tool utilization has been developed and is presented. The presented model shortens the time dedicated to the optimized cutting data selection and the needed iterations along the program development.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hv-8672
Date January 2015
CreatorsBonilla Hernández, Ana Esther
PublisherHögskolan Väst, Forskningsmiljön produktionsteknik(PTW), Trollhättan : University West
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeLicentiate thesis, comprehensive summary, info:eu-repo/semantics/masterThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationLicentiate Thesis : University West ; 7

Page generated in 0.0019 seconds