Most available data from shale production zones tends to point towards the presence of complex hydraulic fracture networks, especially in the Barnett and Marcellus formations. Representing these complex hydraulic fracture networks in reservoir simulators while incorporating the geo-mechanical parameters and fracture apertures is a challenge. In our work we developed a fracture to production simulation workflow using complex hydraulic fracture propagation model and a commercial reservoir simulator. The workflow was applied and validated using geological, stimulation and production data from the Marcellus shale. For validation, we used published data from a 5200 ft. long horizontal well drilled in the lower Marcellus. There were 14 fracturing stages with micro-seismic data and an available production history of 9 months. Complex hydraulic fractures simulations provided the fracture network geometry and aperture distributions as the output, which were up-scaled to grid block porosity and permeability values and imported into a reservoir model for production simulation and history match. The approach of using large grid blocks with conductivity adjustment to represent hydraulic fractures in a reservoir simulator which has been employed in this workflow was validated by comparing with published numerical and analytical solutions. Our results for history match were found to be in reasonable agreement with published results. The incorporation of apertures, complexity and geo-mechanics into reservoir models through this workflow reduces uncertainty in reservoir simulation of shale plays and leads to more realistic production forecasting. The workflow was utilized to study the effect of fracture conductivity damage on production. Homogenous and heterogeneous damage cases were considered. Capillary pressures, determined using empirical relationships and experimental data, were studied using the fracture to production workflow. Assuming homogenous instead of heterogeneous permeability damage in reservoir simulations was shown to have a significant impact on production forecasting, overestimating production by 70% or more over the course of two years. Capillary pressure however was less significant and ignoring capillary pressure in damaged hydraulic fractures led to only 3% difference in production in even the most damaged cases. / text
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/26446 |
| Date | 10 October 2014 |
| Creators | Naseem, Kashif |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
Page generated in 0.0019 seconds