The current work has developed a CFD model to characterise a pseudo-annular photocatalytic bubble column reactor. The model development was divided into three stages. Firstly, hydrodynamic assessment of the multiphase fluid flow in the vessel, which incorporated residence time distribution analysis both numerically and experimentally for validation purposes. Secondly, the radiation distribution of the UV source was completed. The final stage incorporated the kinetics for the degradation the model pollutant, sodium oxalate. The hydrodynamics were modelled using an Eulerian-Eulerian approach to the multiphase system with the standard k- turbulence model. This research established that there was significant deviation in the fluid behaviour in the pseudo-annular reactor when compared with traditional cylindrical columns due to the nature of the internal structure. The residence time distribution study showed almost completely mixed flow in the liquid phase, whereas the gas phase more closely represented plug flow behaviour. Whilst there was significant dependence on the superficial gas flow rate the mixing behaviour demonstrated negligible dependence on the liquid superficial velocity or the liquid flow direction, either co- or counter- current with respect to the gas phase. The light distribution was modelled using a conservative variant of the Discrete Ordinate method. The model examined the contribution to the incident radiation within the reactor of both the gas bubbles and titanium dioxide particles. This work has established the importance of the gas phase in evaluating the light distribution and showed that it should be included when examining the light distribution in a gas-liquid-solid three-phase system. An optimal catalyst loading for the vessel was established to be 1g/L. Integration of the kinetics of sodium oxalate degradation was the final step is developing the complete CFD model. Species transport equations were employed to describe the distribution of pollutant concentration within the vessel. Using a response surface methodology it was shown that the reaction rate exhibited a greater dependency on the lamp power that the lamp length, however, the converse was true with the quantum efficiency. This work highlights the complexity of completely modelling a photocatalytic system and has demonstrated the applicability of CFD for this purpose.
| Identifer | oai:union.ndltd.org:ADTP/257831 |
| Date | January 2007 |
| Creators | Cox, Shane Joseph, Chemical Sciences & Engineering, Faculty of Engineering, UNSW |
| Publisher | Awarded by:University of New South Wales. |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Shane Joseph Cox., http://unsworks.unsw.edu.au/copyright |
Page generated in 0.002 seconds