Return to search

Análise da tenacidade de uma junta soldada de um aço resistente à abrasão da série 450 HB

Aços resistentes à abrasão possuem uma dureza elevada, sendo amplamente utilizados em aplicações em que o componente ou estrutura é submetido a situações em que é exigida alta resistência mecânica e resistência ao desgaste. Este tipo de aço pode ser aplicado para fabricação de implementos rodoviários, implementos agrícolas, montagem de altos fornos e na indústria de mineração. O presente trabalho visa analisar a influência da baixa temperatura na tenacidade de uma junta de aço resistente à abrasão da série 450HB soldado através do processo ao arco elétrico com arame tubular (Flux-Cored Arc Welding- FCAW). Para tanto foram realizados ensaios de tenacidade ao impacto (Charpy-V) no metal base, metal de solda e ZAC nas temperaturas de 25ºC, 0ºC, -20ºC, -60ºC, -80ºC e -100ºC com o objetivo de levantar a curva de transição dúctil-frágil para cada uma dessas regiões. Também foram realizados ensaios para medição da tenacidade à fratura pelo parâmetro CTOD (Crack Tip Opening Displacement) nas regiões do metal base, metal de solda e ZAC nas temperaturas 25ºC, 0ºC, -20ºC. Adicionalmente foram realizados perfis de microdureza Vickers, dureza Brinell, análise química do metal de base e do metal de solda, caracterização metalográfica (macrografia e micrografias) e análises fractográficas a fim de complementar o estudo da junta soldada. Os resultados mostram melhor desempenho do metal base em relação ao ensaio de impacto, entretanto, o metal de solda apresentou melhores resultados de tenacidade à fratura. A região da ZAC apresentou o pior desempenho entre as regiões em ambos os ensaios de tenacidade realizados. / Abrasion resistant steels have a high hardness, being widely used in applications where the component or structure is subjected to situations where high strength and wear resistance is required. This type of steel can be applied to the production of road equipment, agricultural implements, mounting blast furnaces and in the mining industry. The present work analyzes the influence of low temperature on the toughness of an abrasion resistant steel joint of 450HB series welded through the FCAW (Flux Cored Arc Welding-FCAW) process. It was performed tests of impact toughness (Charpy-V) in the base metal, weld metal and HAZ in the temperatures of 25ºC, 0ºC, -20ºC, -60ºC, -80ºC e -100ºC with the objective to raise the ductile-fragile transition curve for each one of these regions. Tests for measurement of fracture toughness by CTOD (Crack Tip Opening Displacement) parameter in the regions of the base metal, weld metal and HAZ in the temperatures of 25 º C, 0 º C, -20 º C were also performed. In addition, Vickers microhardness profile, Brinell hardness, chemical analysis of the base metal and weld metal, metallographic characterization (macrograph and micrographs) and fractography analysis were performed to complement the study of the welded joint. The results show better performance of the base metal in relation to the impact test, however, the weld metal showed a better fracture toughness. The region of the HAZ showed the worst performance among regions in both toughness tests performed.

Identiferoai:union.ndltd.org:IBICT/oai:lume56.ufrgs.br:10183/114987
Date January 2014
CreatorsCosta, Vagner Machado
ContributorsStrohaecker, Telmo Roberto
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguagePortuguese
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFRGS, instname:Universidade Federal do Rio Grande do Sul, instacron:UFRGS
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0038 seconds