Return to search

Nanoscale resonators fabricated from metallic alloys, and modeling and simulation of polycrystalline thin film growth

Part I - We have designed a binary metallic alloy for nanoscale resonator applications. We used magnetron sputtering to deposit films with different stoichiometries of aluminum and molybdenum and then characterized the microstructure and physical properties of each film. A structure zone map is proposed to describe the dependence of surface and bulk structure on composition. We then fabricated proof of principle resonators from the Al-32 at%Mo composition, selected for its optimized physical properties. An optical interferometer was used to characterize the frequency response of our resonators.

Part II - We investigate the growth of faceted polycrystalline thin films with modeling and simulations. A new analytic model is derived for the case of orientation dependent facet growth velocity and the dependence of growth on initial grain orientations is explicitly calculated. Level set simulations were used to both confirm this analytic model and extend it to include various angular flux distributions, corresponding to different deposition methods. From these simulations, the effects of self-shadowing on polycrystalline film growth are quantitatively evaluated. / Materials Engineering

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:AEU.10048/1143
Date06 1900
CreatorsOphus, Colin L
ContributorsMitlin, David (Chemical and Materials Engineering), Michael Brett (Electrical and Computer Engineering), Ken Cadien (Chemical and Materials Engineering), Michael Eikerling (Physics, Simon Fraser University), John Nychka (Chemical and Materials Engineering), Hao Zhang (Chemical and Materials Engineering)
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Format32827466 bytes, application/pdf
RelationZ Lee, C Ophus, LM Fischer et al. (2006) Nanotechnology 17: 3063-3070, C Ophus, EJ Luber, M Edelen et al. (2009) Acta Materialia 57: 4296-4303, C Ophus, N Nelson-Fitzpatrick, Z Lee et al. (2008) Applied Physics Letters 92: 123108, C Ophus, EJ Luber and D Mitlin (2010) Physical Review E 81: 011601, C Ophus, EJ Luber and D Mitlin (2009) Acta Materialia 57: 1327-1336

Page generated in 0.0022 seconds