Choice of the constitutive model and determination of input parameters are necessary for a successful application of numerical methods in geotechnical engineering. Higher complexity of modern constitutive models results in an increase of the number of input parameters and time requirements for their calibration. Optimization methods are a possible solution for this problem. An application in which metaheuristic optimization method Particle swarm optimization (PSO) is involved is presented in this thesis. Critical review and testing of various PSO alternatives was performed in the first part of this thesis. The most efective PSO alternatives were chosen. In the second part connection between PSO algorithm and finite element solver was prepared. Automatization of determination of constitutive models input parameters was performed on three boundary value problems: laboratory test (oedometer), in-situ test (pressuremeter) and geotechical construction (retaining wall). Three types of constitutive models are used. Linear elastic-perfectly plastic Mohr-Coulomb model, elastoplastic non-linear Hardening soil model and Hardening soil - small strain model.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:372248 |
Date | January 2018 |
Creators | Koudela, Pavel |
Contributors | Miča, Lumír, Chalmovský, Juraj |
Publisher | Vysoké učení technické v Brně. Fakulta stavební |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds