One of the key issues of our society is to decrease energy demand. About 40 % of energy consumption in Europe is related to building operation, mostly for heating. The required thermal comfort is related mainly to temperature of air and temperature of surrounding surfaces. Especially in older buildings with low level of thermal insulation the inner surface of perimeter wall can be several degrees colder than air. In such case the perception of thermal comfort will be lowered also depending on the layout of the room. Other issue can be related to thermal radiation asymmetry. The amount of energy that is eradiated from a surface is driven by material property called emissivity. A surface with sufficiently low emissivity will became “thermal mirror”. It is possible to elaborate about intelligent thermal management of the internal space with usage of low-emissive surfaces; where thermal radiation can be suppressed or can be enhanced. This depends on the surface emissivity and its real temperature. Recently, growing interest about the low-emissive surfaces can be seen. They can represent reasonable complement to conventional insulation, but they have certain limits. Potentially, even higher energy savings can be reached with so called retro reflection. If the thermal radiation of an object is reflected back, its thermal loss will be lower. In such case it can be expected that equivalent thermal comfort can be reached even with lower overall temperature of the room. The aim of the work is study of material combinations with potential for utilization as low-emissive interior surfaces. Research has been conducted on low-emissive paints and low-emissive foils. Another part of the work is related to retro reflection of thermal radiation as a potential way to influence thermal comfort. The work shows, that energy saving up to 20% can be obtained.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:234553 |
Creators | Kopkáně, Daniel |
Contributors | Steuer,, Radek, Kmínová,, Hana, Chybík,, Josef, Šťastník, Stanislav |
Publisher | Vysoké učení technické v Brně. Fakulta stavební |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0131 seconds