Return to search

Developing 3D Printed Integrated Microfluidic Devices for Microchip Electrophoresis Separation of Preterm Birth Biomarkers

Preterm birth is a global health challenge and the leading cause of neonatal mortality. Each year, about 15 million babies are born preterm globally. Traditional tools that have been exploited for the detection of preterm birth biomarkers are expensive, time consuming, or lack multiplexing capabilities. The work described in this dissertation highlights techniques developed to detect preterm birth biomarkers rapidly and accurately in the effort to mitigate preterm birth risk. In this dissertation, I first demonstrated the use of stereolithography digital light processing-based 3D printing and microfluidics for the development of microfluidic devices that had microvalves for fluid control. I then used these devices for microchip electrophoresis and fluorescence detection of five preterm birth biomarkers from a published panel. Next, I presented developments in 3D printed microchip electrophoresis device design. I separated amino acids and preterm birth biomarkers in a serpentine device design, obtaining good resolution, separation efficiency, and improved preterm birth biomarker peak capacity. Finally, I demonstrated the integration of solid-phase extraction with microchip electrophoresis in 3D printed microfluidic devices. These integrated devices enabled a seamless transition from preterm birth biomarker enrichment and labeling to microchip electrophoresis separation and fluorescence detection. The work described in this dissertation shows promise in advancing key tools needed to address preterm birth risk rapidly and effectively.

Identiferoai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-11171
Date06 November 2023
CreatorsEsene, Joule E.
PublisherBYU ScholarsArchive
Source SetsBrigham Young University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceTheses and Dissertations
Rightshttps://lib.byu.edu/about/copyright/

Page generated in 0.0019 seconds