Return to search

Predicting Heating Rates in Hypersonic Gap Flows

<p>A study has been undertaken to investigate the flow structure in the vicinity of discontinuities in the surface of a high-speed air vehicle. The effect of gaps and steps on aerodynamic heating is of particular interest. The present    thesis presents Reynolds-averaged Navier Stokes  (RANS) calculations of this class of flow. This thesis consists of two studies: a parametric study of cavity flow at Mach 2 and a study to compare with wind tunnel experiments at Mach 6. The calculations for the parametric study used the Menter two-equation SST turbulence model at fully turbulent conditions. These are two-dimensional cavity flows that were carried out to identify the influence of cavity geometry on flow structure and heating distribution inside the cavity, and to categorize cavity flow regimes. The second study employed RANS calculations for conditions  corresponding to Mach 10 wind tunnel experiments carried out by Nestler et al. (AIAA Paper 1968-673) for Mach 6 boundary layer edge conditions. The SST model used in the parametric study was paired with the Menter oneequation transition model and the two-equation realizable κ-ϵ model in CFD++ was used for the computations. The results showed that, even with adjustment of model parameters, the Menter transition model cannot match the location of laminar to turbulent transition, but it demonstrated good agreement with the experimental data in fully turbulent conditions. The two-equation realizable κ-ϵ model, available in CFD++, was able to accurately model transition and showed favorable agreement for fully turbulent conditions as well.</p>

  1. 10.25394/pgs.20394504.v1
Identiferoai:union.ndltd.org:purdue.edu/oai:figshare.com:article/20394504
Date30 August 2022
CreatorsLaura Haynes Holifield (13170003)
Source SetsPurdue University
Detected LanguageEnglish
TypeText, Thesis
RightsCC BY 4.0
Relationhttps://figshare.com/articles/thesis/Predicting_Heating_Rates_in_Hypersonic_Gap_Flows/20394504

Page generated in 0.0013 seconds