This thesis focused on investigating flow, coherent structures, and mechanisms leading to scour around a series of three submerged groynes in a high curvature (radius of curvature (R)/channel width (B)=1.5) channel bend using a Large Eddy Simulation Numerical (LES) model. Flow was investigated during both an initial and a later stage of scour. The results showed that the groynes appeared effective in keeping the main core of high streamwise velocity away from the outer bank wall in the region where they were installed, although high potential still existed for local scour around the groynes. During the initial stage of scour, horseshoe vortices (HVs) showed the greatest propensity to induce scour immediately upstream of the groyne tips. During the later stage of scour, the HV in front of the first upstream groyne (G1) induced very high mean pressure fluctuations on the outer bank wall. Scour was also of very great concern around the tip of G1 due to severe mean bed pressure fluctuations. Downstream of the groyne field, the presence of a counter-rotating outer bank cell was capable of endangering the stability of the outer bank. The second focus of this thesis was to investigate flow in a 135° channel bend using both Reynolds Averaged Navier Stokes (RANS) and LES numerical models. The RANS study examined the effects of curvature ratio (R/B), and aspect ratio (B/H, where H is the inlet flow depth), on secondary circulation strength, and bed shear stresses. The study revealed that a decrease in R/B was associated with an increase in secondary circulation strength and peak bed shear stress. A change in B/H also substantially affected cross stream circulation strength. The LES study was conducted in a 135° (R/B = 1.5) bend flume with a fixed bed corresponding to near equilibrium scour conditions, and the results were compared to a similar high curvature 193° bend numerical study. Inner bank vortices and shear layers were present in both cases although their characteristics were substantially different. Distributions of boundary friction velocities, and turbulence were also quite different for each case.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OOU.#10393/23323 |
| Date | 26 September 2012 |
| Creators | Kashyap, Shalini |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Thèse / Thesis |
Page generated in 0.0019 seconds