This master's thesis is aimed at creating a methodology for the selection of suitable test for automation testing. The first part is devoted to the definition of the prerequisites for introduction of automated testing and the conditions for its effective course. The second part focuses on defining the exclusion criteria of tests which are unsuitable for automation. The following third part is devoted to defining the selection criteria for the determination of the test priority for automation. The selection criteria have been approved by the head of this thesis and consulted with the supervisor of the practical project, on which the criteria were tested for the first time. Based on these criteria, the individual manual tests are evaluated. Final count of points is used for determination of the test priority. The fourth section is devoted to calculation of the return on investment in automated testing. Because the investments made into the automated testing are very high, it must be assured that their amount will return for the selected period. The fifth part is focused on defining the principles for ensuring the proper maintenance of automated tests and describing the technical complications and frequent problems that may occur during automated testing. The last section is devoted to pilot verification of the methodology on a practical project and for determination of the test priority for automation.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:192423 |
| Date | January 2014 |
| Creators | Lízner, Tomáš |
| Contributors | Buchalcevová, Alena, Zelenka, Petr |
| Publisher | Vysoká škola ekonomická v Praze |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.2482 seconds