Some relevant aspects of dynamics and control of heavy-duty hydraulic machines in a teleoperated mode were investigated. These machines, such as excavators and forest
harvesters, are mostly used in primary industries. They have a manipulator-like structure with a nonlinear and coupled actuating system. The aim of the project is to investigate different approaches towards converting such machines, with minimum changes, into task-oriented human-supervisory control systems. This provides the opportunity
to use both human supervision and robotic power in hazardous environments and for tasks for which human decision is necessary.
A methodology was developed for fast and accurate simulations. Analytical, steady-state and numerical techniques were combined using Large-Scale Systems analysis. The inclusion of nonlinearities in the form of discontinuities (e.g., gear backlash and stick-slip friction) in the model was investigated. Numerical simplifications of the structural dynamics and alternative solutions for the hydraulic part were also studied.
The model describing the performance of the machine has been written in ACSL (Advanced Continuous Simulation Language) on a VAX computer system. A modified version of the program is at present running close to real-time on a single processor in conjunction with high speed graphics in a manner similar to a flight simulator used for human interface studies and training.
The model also evaluates the performance of the machine in a teleoperated mode and under different control strategies. As a result a velocity control algorithm has been developed which is applied in conjunction with the closed-loop components for teleoperation of heavy-duty hydraulic machines; it is basically a feedforward compensation
which uses the measured hydraulic line pressures along with fluid-flow equations as criteria
to control the joint velocities as well as to uncouple the interconnected actuating system. The control algorithm has been written in C language and is running on an IRONICS computer system, interfaced between the human operator and the machine. The simulation results are supported by the experimental evidence. The experiments were performed on a Caterpillar 215B excavator.
Improved operator safety, extension of human capability, job quality and productivity
increase are the advantages of a successful implementation of robotic technology to these industrial machines. / Applied Science, Faculty of / Mechanical Engineering, Department of / Graduate
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/30846 |
| Date | January 1990 |
| Creators | Sepehri, Nariman |
| Publisher | University of British Columbia |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0117 seconds