Return to search

A quantitative correlation between the mining rock mass rating and in-situ rock mass rating classification systems

The three most common rock mass classification systems in use in the South African mining industry
today are Bieniawski’s (1976) Geomechanics or RMR System, Barton et al.’s (1974) Q-System and
Laubscher’s (1990) MRMR System respectively. Of these three systems, only the MRMR
Classification System was developed specifically for mining applications, namely caving operations.
In response to the increased use of the MRMR Classification System in the mining industry, and
concerns that the MRMR System does not adequately address the role played by discontinuities,
veins and cemented joints in a jointed rock mass, Laubscher and Jakubec introduced the In-Situ
Rock Mass Rating System (IRMR) in the year 2000. A quantitative comparison of the MRMR and
IRMR Classification Systems has been undertaken to determine a correlation between the two
classification systems, the results of which indicate that there is not a major difference between the
resultant rock mass rating values derived from the two Classification Systems. Therefore, although
the IRMR System is more applicable to a jointed rock mass than the MRMR System, the MRMR
System should not be regarded as redundant, as it still has a role to play as a mine design tool.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:wits/oai:wiredspace.wits.ac.za:10539/4858
Date20 May 2008
CreatorsDyke, Gregory Paul
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Format945233 bytes, application/pdf, application/pdf

Page generated in 0.0018 seconds