The improvement in mechanical strength offered by ultra fine- (UF) and nanocrystalline (NC) sized grains is very attractive for potential applications of structural metals. Accumulative Roll-Bonding (ARB) is one of the promising new techniques for producing bulk UF grained metals. There are numerous reports on the monotonic mechanical behavior of various ARBed metals, however there are few, if any, on the cyclic deformation behavior of such metals. The primary objective of this study is to investigate the cyclic deformation behaviour and the related micro-mechanisms of ARBed metals from a fundamental perspective. To achieve this, the microstructure and the deformation behavior of commercial purity aluminum, OFHC copper, and DLP copper after ARB processing have been systematically characterized.
The as-ARBed microstructure is found to be composite natured, with constituents of different grain sizes. The three constituents are: (i)UF grained matrix, (ii)NC primary discontinuities, and (iii)conventional sized pre-existing coarse grains. Due to this composite nature, three different cyclic strain accommodation mechanisms were found in the ARBed OFHC copper: (i)conventional dislocation patterns in the large grains, (ii)reactivation of pre-existing shear bands, and (iii)stress/strain driven grain coarsening at sites of strain localization. The order of activation of the mechanisms can be described with a composite approach based on activation energy. The occurrence of grain coarsening is the major contributor to the cyclic softening response observed in OFHC copper. Conversely, the lesser extent of cyclic softening in the other two metals is likely due to the higher microstructure stability of the initial as-ARBed materials. The microstructure stability is believed to be the primary influencing factor for the extent of grain coarsening and cyclic softening. The applied cyclic plastic strain is a secondary influencing factor, although this is generally overshadowed by the limitation of grain coarsening due to the short cyclic lifespan of these metals. The occurrences of shear banding and grain coarsening reported in the present ARBed metals are similarly reported for UF grained metals from other processes, e.g. ECAPed metals. Thus, its relationship to the cyclic deformation response and governing factors are believed to be applicable for UF grained metals in general.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/31810 |
Date | 10 January 2012 |
Creators | Kwan, Charles |
Contributors | Wang, Zhirui |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | en_ca |
Detected Language | English |
Type | Thesis |
Page generated in 1.002 seconds