Return to search

Image Source Modeling of Time Reversal for Room Acoustics Applications

Time Reversal (TR) is a technique that may be used to focus an acoustic signal at a particular point in space. While many variables contribute to the quality of TR focusing of sound in a particular room, the most important have been shown to be the number of sound sources, signal bandwidth and absorption properties of the medium [Ribay et al., J. Acoust. Soc. Am. 117(5), 2866-2872 (2005)]. However, the effect of room size on TR focusing has not been explored. Using the image source method algorithm proposed by Allen and Berkley [J. Allen and D. A. Berkley, J. Acoust. Soc. Am. 65(4), 943-950 (1979)], TR focusing was simulated in a variety of rooms with different absorption and volume properties. Experiments are also conducted in a couple rooms to verify the simulations. The maximum focal amplitude, the temporal focus quality, and the spatial focus clarity are defined and calculated for each simulation. The results are used to determine the effects of absorption and room volume on TR. Less absorption increases the amplitude of the focusing and spatial clarity while decreasing temporal quality. Dissimilarly, larger volumes decrease focal amplitude and spatial clarity while increasing temporal quality. This thesis also explores the placement of individual transducers within a room. It also compares the layout of several source transducers used for a reciprocal time reversal process. Maximum focal amplitude and spatial clarity are found to increase when the focus location is dual coplanar to the source location while temporal quality is found to decrease in comparison to the case when source and focal location share only one plane. Maximum focal amplitude is found to be at a minimum when the focus location is at the critical distance and increases closer and farther away from the source, while temporal quality steadily decreases and spatial clarity steadily increases farther from the source. The maximum focal amplitude and the temporal quality are not greatly affected by the type of array layout, but a circular array is ideal for maximizing spatial clarity.

Identiferoai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-8449
Date01 July 2018
CreatorsDenison, Michael Hunter
PublisherBYU ScholarsArchive
Source SetsBrigham Young University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceTheses and Dissertations
Rightshttp://lib.byu.edu/about/copyright/

Page generated in 0.002 seconds