This thesis deals with rotary drying and sintering kilns. The first part focused upon construction of the kilns, kiln processes and the options of technological arrangement of the kilns. The thesis second part presents two experiments. The first one is targeted to find the relation between residence time, kiln rotary speed and kiln slope in longitudinal direction. The examinations analysed individually the relation between kiln rotary speed and residence time and the relation between kiln slope and residence time. Finally, the regression equation describing the relation between holding time, kiln rotary speed and kiln rake was established. The results given by regression equation much closer to the real one then the results given by literature. The difference between real residence time and the regression one is about one minute. The second one is concerned with producing a set of equations with respect of mass and heat balance in case of drying process. The input material was wet crushed tetra packs. There were established technological conditions of the material, necessary burner energy input, heat losses and distribution of heat between material and flue gas. There were taken away almost 80 percent of heat energy by flue gases. The remaining 20 percent was divided between latent heat, material and heat losses through the shell of the rotary kiln.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:377759 |
| Date | January 2018 |
| Creators | Rafaj, Svatomír |
| Contributors | Hudák, Igor, Skryja, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds