This Master’s thesis is dedicated to a generation of an additional torque, which can occur due to the inaccuracy of the manufacturing. This issue is inspired by a real case from 2013. In this work CFD modeling is used to investigate three different sources of the additional torque: misalignment of the rudder, deviation of the propeller shaft and asymmetry of the rudder. A simplified 2D simulation is done for all three cases. This simulation is more suitable for a jet powered boat. Therefore the asymmetry of the rudder is investigated also in a 3D case, where the rotational component of the flow behind the propeller is included.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:254325 |
| Date | January 2016 |
| Creators | Kazda, Adam |
| Contributors | Fic, Miloslav, Štigler, Jaroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds