Particulate matter (PM) concentrations in ambient air can be monitored by
gravimetric sampling near a source using Federal Reference Method (FRM) samplers.
PM is regulated by size, with PM10, which is comprised of particles with aerodynamic
equivalent diameters less than or equal to 10 μm, being the main focus of this research.
FRM PM10 samplers exhibit sampling errors when sampling dusts with mass median
diameters (MMDs) that are larger than the 10 μm sampler cutpoint. For industries to be
regulated equitably, these sampler errors must be quantified and understood.
This research evaluates the performance of FRM PM10 and low volume total
suspended particulate (TSP) samplers under the controlled conditions of a wind tunnel.
The performance evaluation was conducted by observing the sampler cutpoints, slopes,
and measured concentrations. These measured values were compared to values obtained
using a collocated isokinetic reference sampler.
The results of this research indicate that PM10 samplers do not operate as
intended under all conditions. The cutpoint of the PM10 inlets was significantly higher
than the maximum FRM limit of 10.5 μm when sampling dust with MMDs larger than the cutpoint of the sampler. The slope values for the PM10 inlets were significantly
higher than the maximum FRM limit of 1.6.
MMDs and geometric standard deviations of PM collected by TSP samplers were
significantly different than those of PM collected using the collocated isokinetic
sampler. The concentrations measured by the TSP samplers were significantly higher
than the collocated isokinetic sampler.
The results of this research provide a better understanding of the performance of
TSP and PM10 samplers operating under different conditions and shows that these
samplers are not operating as intended. Because of this, industries may be suffering the
consequences of inequitable regulation.
Identifer | oai:union.ndltd.org:tamu.edu/oai:repository.tamu.edu:1969.1/ETD-TAMU-2010-08-8534 |
Date | 2010 August 1900 |
Creators | Thelen, Mary Katherine |
Contributors | Faulkner, William B. |
Source Sets | Texas A and M University |
Language | en_US |
Detected Language | English |
Type | thesis, text |
Format | application/pdf |
Page generated in 0.0028 seconds