<p> Inflatable structures have attracted much interest in space applications. The three main components of inflatable satellites are inflatable struts, an inflatable torus as the structural support component, and some sort of lens, aperture, or array housed inside the boundary of the torus. This project is devoted towards understanding the dynamic characteristics of an inflated torus with a focus on the self-rigidizing torus, SRT, developed by United Applied Technologies.</p> <p> The self-rigidizing torus is manufactured from flat sheets of Kapton® that are formed into curved films with the regular pattern of hexagonal domes. The inflated torus can support its structural shape even when there is no internal pressure.</p> <p> Modal testing is used to determine the dynamic properties of the structure for comparison with the numerical model. The feasibility of using a non-contact in-house fabricated electromagnetic excitation is investigated. The first four, in-plane and out-of-plane, damped natural frequencies and their corresponding damping ratios and modes shapes are extracted and compared with prior experimental studies. A preliminary finite element modal analysis is carried out for a torus made of flat film and the results are compared with prior studies. Kapton 300JP®'s frequency-dependent modulus of elasticity is determined.</p> <p> Owing to the large number of hexagonal domes in the self-rigidizing torus, a simplified sub-structuring technique is used. Each hexagonal dome is replaced with a statically equivalent flat hexagon with the same mass and stiffness as the hexagonal dome. Then the finite element modal analysis of the self-rigidizing torus is carried out for an equivalent torus made of flat film. The geometric nonlinearity and the effect of the follower load on the stiffness are included in this analysis. The methodology is verified through the correlation between the analytical and modal test results of the self-rigidizing torus.</p> / Thesis / Doctor of Philosophy (PhD)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/19050 |
| Date | 12 1900 |
| Creators | Pazhooh, Mitra Danesh |
| Contributors | Dokainish, Mohammed Ali, Ziada, Samir, Mechanical Engineering |
| Source Sets | McMaster University |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0015 seconds