An initial evaluation of the scalability of extrusion foaming technology is conducted in this thesis. Both lab- and pilot-scale foam extrusion systems along with annular dies and flat dies were used to investigate the effects of extrusion system scale on the foam expansion. The effects of the processing conditions including die temperature and blowing agent content on the volume expansion of extruded polystyrene foams blown with carbon dioxide are presented. A systematic comparison of the effects of extrusion system scale on the expansion behavior of polystyrene foams blown with carbon dioxide at the consistent pressure-drop rate, demonstrated that the scale of the foam extrusion system does not affect the principles of the foaming process, and the effects of extrusion system size on the scale-up of foam techniques, such as shear rate and temperature uniformity, could be suppressed by tailoring the processing conditions and experimental parameters.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/25536 |
| Date | 31 December 2010 |
| Creators | Zhang, Hongtao |
| Contributors | Park, Chul B. |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds