Doctoral thesis deals with combustion engine cranktrain vibrations and vibration analysis methods. The work applies new computational models aimed at powertrain vibration decrease. The computational models can be used in the first stages of powertrain development. Temperature dependences of the rubber shear modulus and loss factor characteristic are found by response analysis of the free damped vibrations in the first part of the thesis. Viscoelastic model parameters of two dampers with different rubber hardness are calculated using optimization methods. Temperature distribution inside the rubber part during the harmonic oscillation is calculated with the knowledge of previous values. Computational models together with a user interface are assembled in Matlab/Simulink software tool. Computational model results of the viscoelastic rubber damper are verified by measurements on a prototype diesel engine in the whole operating engine speed range. Torsional vibrations of the crankshaft with torsional damper are measured by POLYTEC laser rotational tools. The temperature distribution on the damper surface is obtained by Infratec VarioCAM thermographic system. Combustion pressures in the cylinder are measured by SMETEC Combi indication tools. Both the temperature distributions and combustion pressures are used for computational purposes. All the measurement procedures are described also in the thesis.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233980 |
| Date | January 2011 |
| Creators | Svída, David |
| Contributors | Kovář, Rudolf, Dundálek, Radim, Kovář, Rudolf, Dundálek, Radim, Píštěk, Václav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds