The introduction part of the thesis focuses on the overview of rapid prototyping in foundry industry. Principles of the most important RP methods are described and the FDM method is analyzed in more detail. This method was used in the practical part for the production of wax patterns with silicone moulds. The wax patterns were used for the production of castings using the lost wax method. The result of this work is determination of dimensional changes during the whole process of casting manufacture from the drawing to the final casting.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229708 |
| Date | January 2011 |
| Creators | Šmíd, Jiří |
| Contributors | Horenský, Jiří, Horáček, Milan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds