Deposition of thin material films by sputtering is an increasingly common process in the field of silicon (Si)-based photovoltaics. One of the recently developed sputter-deposited materials applicable to Si photovoltaics comprises Si nanocrystals (NCs) embedded in a Si-based dielectric. The particular case of Si nanocrystals in a Silicon Dioxide (SiO2) matrix was studied by fabricating metal-insulator-semiconductor (MIS) devices, in which the insulating layer consists of a single layer of Si NCs in SiO2 deposited by sputtering (Si:NC-MIS devices). These test structures were subjected to impedance measurements. The presence of Si NCs was found to result in two distinct capacitance peaks. The first of these peaks is attributable to the small signal response of states at the insulator/substrate interface, enhanced by the presence of fixed charge associated with the NC layer. The second peak, which occurs without precedent, is due to external inversion layer coupling, in conjunction with a transition between tunnel-limited and semiconductor-limited electron current. Si:NC-MIS devices are also potential test structures for energy-selective contacts, based on SiO2/Si NC/SiO2 double barrier structures fabricated by sputtering. Using a one-dimensional model, current-voltage (I-V) curve simulations were performed for similar structures, in which the Si NCs are replaced by a Si quantum well (QW). The simulations showed that for non-degenerately doped Si substrates, the density of defects in the SiO2 layers can strongly influence the position of I-V curve structure induced by QW quasi-bound states. Passivation of crystalline Si (c-Si) surfaces by sputter-deposited dielectric films is another major application of sputtering for Si photovoltaics. This application was explored for the cases of sputtered SiO2 and hydrogenated Silicon Oxy-Carbide (SiOC:H). For the case of sputtered SiO2, an effective surface recombination velocity of 146 cm/s was achieved for an injection level of 1E15 cm???3. The investigated SiOC:H films were found to be unsuitable for surface passivation of Si, however their passivation performance could be slightly improved by first coating the Si surface with a chemically-grown or sputtered SiO2 layer. The investigations performed into specific aspects of sputter-deposited SiO2, Si NCs, and SiOC:H have highlighted important properties of these films, and confirmed the effectiveness of sputtering as a deposition technology for Si photovoltaics.
| Identifer | oai:union.ndltd.org:ADTP/272645 |
| Date | January 2009 |
| Creators | Flynn, Christopher Richard, ARC Centre of Excellence in Advanced Silicon Photovoltaics & Photonics, Faculty of Engineering, UNSW |
| Publisher | Awarded by:University of New South Wales. ARC Centre of Excellence in Advanced Silicon Photovoltaics & Photonics |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Flynn Christopher Richard., http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0016 seconds