Thesis regarding the application of the Kinematic Element Method to slope stability analysis in geotechnical engineering. / In this thesis, the effectiveness of the Kinematic Element Method (KEM), developed by Dr. Gussmann at the University of Stuttgart, was evaluated by comparing the solutions with the Limit Equilibrium Method (LEM), specifically the Morgenstern-Price method. The KEM was evaluated using a variety of problems, ranging from homogeneous slopes to retaining walls. The KEM was shown to predict similar potential failure mechanisms and values for the factor of safety (FS) as the Morgenstern-Price method. The FS were generally within the ±6% which is the range of variance for rigorous limit equilibrium methods. A simplified version of KEM (KEMv) was developed based on limit equilibrium formulations. In KEMv, an alternate iterative scheme to determine the FS is proposed, in which boundaries between elements are vertical. The KEMv provided similar values for the factor of safety and interelement forces as Gussmann’s KEM for vertical interelement boundaries given similar element locations. The KEM was assumed by Gussmann to be an upper bound solution. However, given the similarities in the solutions between KEM and KEMv, it may be a limit equilibrium method. The interelement forces from the KEM and KEMv were found to be sensitive to the location of the elements. Elements in the upper part of the slope often had small normal forces relative to shear forces, possibly being negative as well. Sensitivity analysis regarding the number of elements showed that a 5-element solution predicts the appropriate failure mechanism and provides a reasonably accurate FS. In a parametric study, slope geometry and soil properties were varied and comparisons were made between KEM and the Morgenstern-Price method. The KEMv displayed similar trends in factor of safety as the Morgenstern-Price method but predicted slightly larger values. The change in KEM critical slip surfaces with soil properties was consistent with trends predicted by Janbu’s dimensionless parameter. / Thesis / Master of Applied Science (MASc) / The stability of slopes is a challenging subject in geotechnical engineering. Geotechnical engineers are often interested in the factor of safety (FS), which is a quantitative measure of the stability of a slope. In this thesis, the effectiveness of the Kinematic Element Method (KEM) is evaluated by comparing its solutions to the Limit Equilibrium Method (LEM). The KEM was shown to predict similar potential failure mechanisms and values for the factor of safety. A simplified version of the KEM (KEMv) was developed based on LEM formulations. In KEMv, an alternate iterative scheme to determine the FS is proposed, in which the boundaries between elements are vertical. The KEMv provided similar values for the factor of safety and element forces as Gussmann’s KEM for vertical interelement boundaries. In a parametric study, KEM displayed similar trends in the change in FS and critical slip surface as the LEM.
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/24431 |
| Date | January 2019 |
| Creators | Kader, Adnan |
| Contributors | Stolle, Dieter, Civil Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.1107 seconds