This thesis deals with the use of Atomic Force Microscopy (AFM) and Kelvin Probe Force Microscopy (KPFM) in solar cells production. Both techniques measure surface properties using interactions between surface and tip that progressively scans entire surface of the sample. Atomic force microscopy allows three dimensional imaging of surface structure. Kelvin probe force microscopy is used to measure the contact potential difference on the sample surface. There are described experimental measurements of monocrystalline and multicrystalline substrates after various etching processes using AFM. By using KPFM the contact potential difference was measured on dielectric layers PSG, SiOX, SiNX and Al2O3 and on selective emitter structures. All experiments described in this work were carried out at the Solartec Ltd. workplace and they completely correspond with the actual technology of crystalline solar cells production.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:220108 |
Date | January 2013 |
Creators | Mojrová, Barbora |
Contributors | Boušek, Jaroslav, Hégr, Ondřej |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds