<p>An Adaptive Cruise Controller (ACC) is an extension of an ordinary cruise controller. In addition to maintaining a desired set velocity, an ACC can also maintain a desired time gap to the vehicle ahead. For this end, both the engine andthe brakes are controlled. </p><p>The purpose with this thesis has been to develop control strategies for an ACC used in heavy vehicles. The focus of the work has been the methods used for switching between the use of engine and brake. Two different methods have been studied, a hybrid controller and an MPC-controller. </p><p>For the hybrid controller, the main contribution has been to use the influence of the surroundings on the acceleration of the truck. This consists of several parts such as wind drag, road slope and rolling resistance. The estimated influence of the surroundings is used as a switch point between the use of engine and brakes. Ideally, these switch points give bumpless actuator switches. </p><p>The interest in the MPC-controller as an alternative solution was to achieve automatic actuator switching, thus with no explicitly defined switch points. The MPC-controller is based on a model of the system including bounds on the control signals. Using this knowledge, the MPC-controller will choose the correct actuator for the current driving situation. </p><p>Results from simulations show that both methods solve the actuator switch problem. The advantages with the hybrid controller are that it is implementable in a truck with the hardware used today and that it is relatively simple to parameterise. A drawback is that explicit switch points between the uses of the different actuators have to be included. The advantages with the MPC-controller are that no explicit switch points have to be introduced and that constraints and time delays on signals in the system can be handled in a simple way. Among the drawbacks, it can be mentioned that the variant of MPC, used in this thesis, is too complex to implement in the control system currently used in trucks. One further important drawback is that MPC demands a mathematical model of the system.</p>
Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-1604 |
Date | January 2003 |
Creators | Axehill, Daniel, Sjöberg, Johan |
Publisher | Linköping University, Department of Electrical Engineering, Linköping University, Department of Electrical Engineering, Institutionen för systemteknik |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, text |
Relation | LiTH-ISY-Ex, ; 3416 |
Page generated in 0.2694 seconds