Stress relieving in the welded joints occurs when loaded of the platform lift. Critical welds of profile from steel S235JRH and of stiffener from steel S355J0 are examined in terms of flexibility, strength and safety using strength analysis method. Under different welding conditions and parameters are performed the testing welds by method MAG. Macroscopic and microscopic inspection are conducted as well as tension test. Weld created in active gas 82 %Ar + 18 %CO2, by dip transfer with low values of welding current 96 A and voltage 20,2 V became as the top evaluated sample. This weld is recommended to use in practice.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231112 |
Date | January 2015 |
Creators | Měřičková, Petra |
Contributors | Daněk, Ladislav, Kubíček, Jaroslav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds