This study explores the behavior of a Boiling Water Reactor (BWR) during a turbine trip scenario initiated by the abrupt closure of the turbine stop valve. The RELAP5/Mod3.4 code is employed to make calculations using the Laguna Verde Nuclear Power Plant input model provided by Innovative Software Systems Company. The event sequences and initial boundary conditions are sourced from the Boiling Water Reactor Turbine Trip 2 Benchmark created by NEA. Results are subsequently compared against the benchmark values.
In order to gauge the risk of a turbine trip event leading to elevated power, which could in turn cause Critical Heat Flux (CHF)-related issues in cladding temperature, a best-estimate case is developed. Our findings indicate that the closure of the turbine stop valve (TSV) resulted in a collapse of the void fraction within the reactor core. Although the core power doubled the initial level, the negative feedback mechanism effectively suppressed the power pulse. Throughout the transient phase, the maximum cladding temperature stayed below the CHF threshold, a fact attributable to the fuel's conductivity and the rapid progression of the transient.
We further analyzed three hypothetical scenarios to test the computational boundaries of the plant model. The third scenario, which combines conditions from the first two, produced elevated outcomes (6500MW core power, 598K cladding temperature, and 7900kPa dome pressure) as expected. Notably, while the CHF limit remained unbreached in this scenario, literature reviews suggest potential core meltdown risks in subsequent stages of this calculation.
Our sensitivity analyses determined that variations in the gamma heating coefficient or the maximum time step of the calculations have little to no impact on core power or peak cladding temperature. Conversely, we noted a significant reduction, approximately 35\%, in the power peak, underscoring the high sensitivity of the parameters to the initial triggering of the SCRAM mechanism. Our results also recommend rapid and early actuation of the BPV as a measure to dampen the pressure wave, consequently decreasing both the power peak and peak cladding temperatures. / Thesis / Master of Applied Science (MASc) / This research investigates the response of the Laguna Verde Boiling Water Reactor to a turbine trip event using the RELAP5/Mod3.4 thermal-hydraulic analysis code. From reactor safety perspective a best-estimate case is evaluated, as well as three additional hypothetical scenarios. Findings are compared with the Boiling Water Reactor Turbine Trip II Benchmark results. Additionally, sensitivity analyses focusing on plant parameters such as shutdown rod behavior, gamma heating coefficient, turbine stop valve, and steam bypass valve characteristics conducted to determine their impact on the results. Insights from these analyses aim to enhance safety protocols and refine best practices in boiling water reactor management.
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/28967 |
| Date | January 2023 |
| Creators | CAKIR, Ramazan BAYRAM |
| Contributors | NOVOG, David, Engineering Physics |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0024 seconds