Thesis (MTech (Construction Management))--Cape Peninsula University of Technology, 2010 / The construction industry adopts various methods to bring about the required structure.
Typically, in every construction project, health and safety of workers will remain a major
concern on site due to accidents, fatalities and illnesses which occur regularly. Despite these
incidents raising a concern, construction site activities still involve workers in manual handling
of heavy material and repetitive body movements which constitute ergonomic problems; The
purpose ofthis study is to investigate the potential impacts of prefabrication and pre-assembly on
the health and safety of construction workers.
The objectives of this study were (l) to examine the health and safety hazards associated
with traditional construction methods in South Africa; (2) to investigate the merits of
prefabrication and pre-assembly in terms of their impact on overall health and safety
improvements when compared with traditional construction methods; and (3) to investigate how
construction clients perceive the use of prefabrication and pre-assembly as alternative
construction methods that positively impact the overall health and safety of construction workers
on site.
Literature pertaining to the content of this research was extensively reviewed. An
exploratory study was undertaken to examine the merits of prefabrication and pre-assembly in
reducing ergonomic challenges associated with traditional construction methods, where
construction workers were observed and interviewed. A self-administered questionnaire survey
was used for construction clients, designers and contractors.
The study revealed that 80% of clients in the sample reported that they preferred
traditional construction methods instead of prefabrication. It was also found that clients selected
prefabrication and preassembly for other reasons which were not associated with particular
improvements ofhealth and safety in construction project.
The study found that labour intensive methods also commonly known as traditional
construction methods exposed workers to physically demanding activities that posed risks to
their health and safety. Reportedly, 76% of workers experienced pain in their waist areas, 70%
had pain in their shonlder and 66% had back problems while they were involved in traditional
construction. Workers sometimes had to handle heavy material manually, worked at heights and
experienced noise caused by heavy construction equipment. However, a case study focused on
bricklaying activities and prefabrication insulation wall fixing revealed that prefabrication
reduced the exposures of workers to both ergonomic challenges and ergonomic problems. The
findings also suggest that traditional construction methods were more hazardous than ones
involving prefabrication.
Further research is needed to determine whether the use of other forms of prefabricated
and preassembled components would reduce ergonomic and health and safety hazards associated
with traditional construction methods.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:cput/oai:localhost:20.500.11838/1056 |
| Date | January 2010 |
| Creators | Bikitsha, Luviwe |
| Publisher | Cape Peninsula University of Technology |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Rights | http://creativecommons.org/licenses/by-nc-sa/3.0/za/ |
Page generated in 0.0024 seconds