Return to search

Analysing the critical design parameters for reuse

Reuse of components as opposed to material recovery, recycling or disposal has been identified as one of the most efficient EOL strategies for products. The concept behind reuse is that some components and subassemblies have a design life that exceeds the life of the product itself. In order for reuse to be successfully implemented as an EOL strategy, a designer needs to incorporate into a product a philosophy of Design for Reuse (DfRe) at the early design stage. Reliable methods to assess the remaining life of used components based on a products usage life are also required. Furthermore, current industry practices and literature advocate that there is no methodology to decide which parameters need to be redesigned so as to change the life of a selected component to a desired level. The objective of this research is to develop a methodology to assess the reuse potential of product groups based on component failure mechanisms and their associated critical lifetime prediction design parameters. Utilising these clustered groups mathematical models were then developed to establish the useful life of the components for each clustered group. Finally, a means of equating useful life to design life was established and the relationship between, the failure mechanisms, critical lifetime prediction design parameters and design life were represented in graphical format. In order to achieve the proposed objective, Cluster analysis, in particular Group Technology (GT) and Hierarchical clustering were employed to group components with similar failure mechanisms. Following this, multiple linear regression was used to establish mathematical models based on condition monitoring data for each of the clustered groups and their related critical lifetime prediction design parameters. A sensitivity analysis was conducted using the mathematical models, in order to produce graphical relations between the useful life and design parameters of a product. The validity of the suggested methodology was tested on electric motors and a gearbox as both these components have demonstrated great reuse potential. The results demonstrate that the methodology can assist designers in estimating the design life and associated design parameters with great accuracy, and subsequently aiding in a stratagem for reuse.

Identiferoai:union.ndltd.org:ADTP/234064
Date January 2006
CreatorsIbbotson, Scott, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW
PublisherAwarded by:University of New South Wales. School of Mechanical and Manufacturing Engineering
Source SetsAustraliasian Digital Theses Program
LanguageEnglish
Detected LanguageEnglish
RightsCopyright Scott Ibbotson, http://unsworks.unsw.edu.au/copyright

Page generated in 0.002 seconds