This work deals with the development and optimization of conditions of pretreatment of two industrial surface finishing baths containing chromium(III) ions and oxalic, maleic, acetic or citric acid and their electrophoretic analysis. Some model mixtures containing known amounts of components of industrial solutions have been made for simulation of complex matrices of the real samples. Prior to analysis a sample pre-treatment consisting of different dilution and addition of fluoride, hydroxide or EDTA anions as suitable agent releasing acid out of the stable chromium complex were studied. Determination of organic anions was accomplished by indirect UV detection at 350 nm with a reference at 230 nm. A commercially available background electrolyte, pH 5.7, was used for separation of analytes. The most appropriate pre-treatment to release acids have been achieved by precipitation of chromium(III) hydroxide. The method of standard additions was used for the quantification. The concentrations of oxalate and citrate in the real samples were calculated as 96,50 % (S.D. = 0,71 %) and 97,53 % (S.D. = 0,79 %), respectively, of declared amount. Satisfactory repeatabilities were obtained for both analytes with R.S.D. values (n = 5) for migration times lower than 0,51 %, R.S.D. for peak areas of oxalic acid were...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:338209 |
| Date | January 2014 |
| Creators | Taraba, Lukáš |
| Contributors | Křížek, Tomáš, Sobotníková, Jana |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0026 seconds