Return to search

Research dilatometer testing in sands and in clayey deposits

The development of Marchetti's flat dilatometer, method of testing, changes of Marchetti's (1980,1981) original correlations and Schmertmann's (1982,1983) proposed correlations are briefly described.
Factors affecting results of the dilatometer test (DMT) are discussed. In order to improve the understanding of the Marchetti dilatometer test (DMT), an electronic research dilatometer was developed at UBC. The research dilatometer can measure; pore pressure at the center of the membrane, membrane displacement, applied pressure, pushing force and verticality.
Test results obtained from the research dilatometer in sand and in clayey deposits at 4 sites in the Lower Mainland of B.C. are presented. Soil parameters interpretated using Marchetti's (1980,1981) and Schmertmann's (1982,1983) correlations are discussed. Comparison is made to other in-situ testing methods such as cone penetration test, vane shear test and pressuremeter test.
Based on a better understanding of the DMT, future potential methods of improving or checking the existing correlations are proposed. / Applied Science, Faculty of / Civil Engineering, Department of / Graduate

Identiferoai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/26749
Date January 1987
CreatorsTsang, Clifford Hing-Cheung
PublisherUniversity of British Columbia
Source SetsUniversity of British Columbia
LanguageEnglish
Detected LanguageEnglish
TypeText, Thesis/Dissertation
RightsFor non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.

Page generated in 0.0019 seconds