Return to search

Orientation-dependent adaptive antenna for low earth orbit satellite communications

In remote areas without conventional cellular service, satellite communication is often the only viable option. Handheld devices for use with satellite communication networks require a high transmit power to obtain a reliable signal. The need for a high transmit power makes it difficult for the device to meet specific absorption rate (SAR) restrictions. An adaptive beam forming technique for shaping radiation away from the user’s head is proposed. This technique uses a back-to-back patch antenna design with an impedance monitoring based system capable of adaptively controlling the pattern of the antenna. The adaptive antenna system was designed, simulated, fabricated, and measured. The system could detect a head phantom within 3 cm of the antenna. SAR levels were verified to be within safety restrictions at 3 cm through simulation. By turning off the patch facing the user’s head when the phone is transmitting, and the user’s head is within 3 cm, it was shown that SAR levels could be reduced to safe levels. / February 2017

Identiferoai:union.ndltd.org:MANITOBA/oai:mspace.lib.umanitoba.ca:1993/32105
Date06 February 2017
CreatorsWoods, Bo
ContributorsBridges, Greg (Electrical and Computer Engineering), Mojabi, Puyan (Electrical and Computer Engineering) Birouk, Madjid (Mechanical Engineering)
Source SetsUniversity of Manitoba Canada
Detected LanguageEnglish

Page generated in 0.0021 seconds