Energy efficiency optimization of electric machines is an important research field and is part of the objectives of several international projects such as the European Commission Climate and Energy package which has set itself a 20% energy savings target by 2020, and was extended for 2030 with higher targets. Therefore, this thesis proposes an efficiency optimization method of the Induction Machine (IM) through the variation of the control parameters. To achieve this goal, the flux in the airgap is modified according to an optimal flux table computed off-line for all possible operating points. The flux table is calculated with the best possible accuracy through an improved dynamic model of the IM, developed in these works. The latter avoids the main drawback of the classic dynamic model, by considering the effect of core losses. The core loss model established by Bertotti is used. It depends on the frequency and the amplitude of the magnetic field. The losses are then represented by a variable resistor, continuously evaluated according to the operating point. The established optimal flux table is a function of the operating conditions in terms of torque and speed. Indeed, the results show that the flux can be optimized for torque values less than about half the rated torque, and that this threshold is influenced by the speed. The proposed optimization method is simulated, then tested for the scalar control and the field-oriented control, in order to show the genericity of the proposed approach. The validation is carried on an experimental test bench for two 5.5 kW induction motors of different efficiency standards (IE2 and IE3). The results obtained show the reduction of the losses in the motor, thus an improvement of the overall efficiency while preserving a satisfactory dynamic behavior. Consequently, the optimization of the energy efficiency is validated for the two control structures and for the two studied motors. In addition to the validation of the simulation results, the proposed approach is compared to existing methods to assess its effectiveness
| Identifer | oai:union.ndltd.org:univ-toulouse.fr/oai:oatao.univ-toulouse.fr:19777 |
| Date | 16 January 2018 |
| Creators | Khoury, Gabriel |
| Contributors | Institut National Polytechnique de Toulouse - INPT (FRANCE), Laboratoire Plasma et Conversion d'Energie - LAPLACE (Toulouse, France) |
| Source Sets | Université de Toulouse |
| Language | English |
| Detected Language | English |
| Type | PhD Thesis, PeerReviewed, info:eu-repo/semantics/doctoralThesis |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | http://oatao.univ-toulouse.fr/19777/ |
Page generated in 0.0025 seconds