Computer designed missing tissue and dose compensators have been produced and dosimetrically tested under a linear accelerator 6MV X-ray beam. Missing tissues compensators were developed to correct for patient external contour change only. Target dose compensators were developed to achieve a uniform dose throughout the target volume. With compensators present in the beam, data acquisition was repeated in a water phantom and an Anthropomorphic phantom. Clinically acceptable dose uniformity was achieved within these phantoms. For external contour compensation flat isodose curves were obtained giving an even dose in the region of interest. The dose difference found was within plus/minus 3% only. For the phantoms containing inhomogeneities dose uniformity to target volume was achieved within plus/minus 7%. Prediction of radiation dose was made using a GE Target Series 2 Treatment Planning Computer for each of the phantoms. Validation of the computer predicted dose was carried out using diode and TLD measurements. The measured data in the water tank was consistent with the computer data within plus/minus 2% for external contour changes and for inhomogeneities. The TLD measured results in the anthropomorphic phantom agreed with the planning computer results within 6%. Up to 4% of the difference is explainable due to supra-linearity and scatter effects / Master of Science (Hons) (Physics)
| Identifer | oai:union.ndltd.org:ADTP/235897 |
| Date | January 1995 |
| Creators | Piyaratna, Nelson, University of Western Sydney, Nepean, Faculty of Science and Technology |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Source | THESIS_FST_XXX_Piyaratna_N.xml |
Page generated in 0.0022 seconds