Global warming and developments of alternative energy technologies have become important issues nowadays. Subsequently, the concept of energy harvesting is rising because of its ability of transferring waste energy into usable energy. Thermoelectric devices play a role in this field since there is tremendous waste heat existing in our lives, such as heat from engines, generators, stoves, computers, etc. Thermoelectric devices can extract the waste heat and turn them into electricity. Moreover, the reverse thermoelectric phenomenon has the function of cooling which can be applied to refrigerator or heat dissipation for electronic devices. However, the energy conversion efficiency is still low comparing to other energy technologies. The efficiency is judged by thermoelectric figure of merit (ZT), defined by Seebeck coefficient, electrical conductivity and thermal conductivity. In order to improve ZT, thin film materials are good candidates because of their structural effects on altering ZT. Ca3Co4O9 thin films grown by reactive radio frequency magnetron sputtering followed by post-annealing process is studied in this thesis. Structural properties of the films with the evolution of elemental ratio (Ca/Co) of calcium and cobalt have been investigated. For the investigations, three samples having elemental ratio 0.82, 0.72, and 0.66 for sample CCO1, CCO2 and COO3, respectively, have been prepared. Structural properties of the films have been investigated by X-ray diffraction (XRD) θ-2θ and pole figure analyses. Surface morphology of the films has been investigated by scanning electron microscopic (SEM) analyses. The highly oriented and phase pure epitaxial Ca3Co4O9 thin films were obtained in the end. Mixing of ScN and CrN to obtain ScxCr1-xN solid solution thin films by DC magnetron sputtering is the other task in this thesis. Growth of ScN and CrN thin films were studied first in order to get the best mixed growth conditions. The phase shifts between ScN (111) and CrN (111) peaks were observed in mixed growth films by XRD θ-2θ measurements, indicating the formation of ScxCr1-xN. Surface morphology of the films were investigated by SEM. The (111)-oriented ScxCr1-xN thin films with decent surface smoothness grown by DC magnetron sputtering at 600 °C in pure nitrogen with bias were developed.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-109106 |
Date | January 2014 |
Creators | Lin, Keng-Yu |
Publisher | Linköpings universitet, Tunnfilmsfysik, Linköpings universitet, Tekniska högskolan |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.3835 seconds