<p>III-V nanowire (NW) ensemble devices were fabricated using novel approaches to address key NW optoelectronic issues concerning electrical contacts, doping, surface effects and underlying electrostatics physics.</p> <p>NWs were first embedded in a filling medium, thus achieving low sheet resistance front contacts while preventing shunts. Various filling materials were assessed for porosity, surface roughness and thermal stability, giving Cyclotene as an ideal filing material. Sonication was also introduced as a novel method to achieve perfect planarization.</p> <p>The presence of the Cyclotene also enabled the NWs to be characterized precisely and easily by secondary ion mass spectrometry (SIMS) to give the NW dopant concentration with excellent spatial resolution. Additionally, SIMS characterization demonstrated the ability to characterize the height uniformity of individual segments in a heterostructure NW ensemble.</p> <p>The focus of the work shifted towards surface effects on NW device performance. Therefore, Poisson's equation was solved to provide a comprehensive model of NW surface depletion as a function of interface state density, NW radius and doping density. Underlying physics was examined where surface depletion was found to significantly reduce the conductivity of thin NWs, leading to carrier inversion for some.</p> <p>This model was then applied in conjunction with a transport model to fit current-voltage curves of an AlInP-passivated GaAs NW ensemble device. A 55% decrease in surface state density was achieved upon passivation, corresponding to an impressive four order of magnitude increase in the effective carrier concentration. Additionally, conventional and time-resolved photoluminescence measurements showed intensity and carrier lifetime improvement greater than 20x upon passivation.</p> <p>Finally, the model was extended to describe radial pn junction NWs with surface depletion to give radial energy band profiles for any arbitrary set of NW parameters. Specific cases were analyzed to extract pertinent underlying physics, while the built-in potential was optimized for the design for an optimal device.</p> / Doctor of Philosophy (PhD)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/13335 |
| Date | 10 1900 |
| Creators | Chia, Andrew |
| Contributors | LaPierre, Ray, Engineering Physics |
| Source Sets | McMaster University |
| Detected Language | English |
| Type | thesis |
Page generated in 0.0022 seconds