An alternative structural system for short span bridges is presented: a precast segmental double-T with external, unbonded post-tensioning tendons. Single-span designs from 20 to 45 m long show that the system can be implemented over a wide range of spans and that the system’s sensitivity to post-tensioning losses reported in previous literature can be reduced by aligning the prestressing force more concentrically.
Designs for multi-span bridges using this system are presented using simply supported spans connected by thin flexible linking slabs made of ultra high-performance fibre-reinforced concrete and using sections made fully continuous over intermediate supports.
A simplified method of geometry control is presented to facilitate the proper alignment of precast segments without the use of match casting.
The precast segmental double-T bridge is compared to sixteen existing slab on girder bridges and found to be a competitive alternative in terms of material use, cost, construction schedule, and aesthetic merit.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/32625 |
| Date | 16 August 2012 |
| Creators | Smith, Jeffrey Stuart |
| Contributors | Gauvreau, Douglas Paul |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0016 seconds