This rapport deals with the construction of a self-balancing scooter. A self-balancing scooter is a two-wheel vehicle where the velocity is controlled by the tilt of the driver. When the driver leans forward and backward, the vehicle is running forward and backwards. The main task was to determine if the Arduino microcontroller could be used for the control system. An iron frame, control circuit and a tilt able handlebar were constructed. Two recycled permobil DC-motor were mounted onto the iron frame. An accelerometer and a gyrometer were obtaining the tilt of the handlebar and the scooter. The system was using locked Anti-phase drive and a PI-regulator to control the motors. The self-balancing scooter prototype worked well and was able to balance without any external help. The driver was able to control the speed by tilting forward or backward and was able to choose the direction by the tilt of the handlebar. The balance was affected negative by the backlashes from the gear and too weak H-bridges. If the project were made again, two three-phase hub motors with higher ratings would replace the DC-motors. Gears could be excluded and the backlashes are removed.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-300903 |
| Date | January 2016 |
| Creators | Rosencrantz, Frans |
| Publisher | Uppsala universitet, Elektricitetslära |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | TVE ; 16 053 |
Page generated in 0.0022 seconds