The alternative seismic design provisions for diaphragms provided in ASCE 7-22 Minimum design loads and associated criteria for buildings and other structures Section 12.10.3 account for both diaphragm ductility and displacement capacity, producing more accurate design forces and decreased detailing when compared to conventional seismic design methods. However, the diaphragm design force reduction factor has not yet been determined for tension-only roof truss diaphragms, a common system used in metal buildings. In this study, experimental tests of two cantilevered diaphragm subassembly specimens with tension-only rod bracing were conducted to determine the load-deformation behavior of the system. The first specimen used 7/8-in. rods, two types of hillside washers, two types of compression members, and two configurations of lateral bracing. The second specimen used 3/4-in. rods, one type of hillside washer, one type of compression member, and one configuration of lateral bracing. Four tests were conducted. One additional test was conducted on each specimen to determine the friction in the test setup. The system developed significant ductility during testing and the yield mechanism was primarily tensile yielding of the rods. The results indicate that a diaphragm design force reduction factor of 2.0 for structures with periods greater than 1.0 second and 1.7 for structures with periods between 0.12 and 0.5 seconds may be appropriate for metal building systems if the lateral bracing of the compression member is prevented from buckling.
| Identifer | oai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-10946 |
| Date | 17 April 2023 |
| Creators | Meek, Benjamin Johnson |
| Publisher | BYU ScholarsArchive |
| Source Sets | Brigham Young University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
| Rights | https://lib.byu.edu/about/copyright/ |
Page generated in 0.0022 seconds